Simple Bluetooth BLE between ESP32 devices

46106418305_9d9af13253_k.jpg

There are lots of things in life that are supposed to be difficult. One of them is getting Bluetooth to work between devices. However, this is now not the case. Because I can do it.

It’s not quite a simple as you might expect though, the BLE server and client examples for the ESP32 devices distribution don’t work straight out of the box (they really should) because they use different service and characteristic ids and (and this is the tricky one folks) the device name for the server is more than three characters long (which for some reason stops the client from recognising it).

Anyhoo, to make things really useful for you I’ve slightly fettled the samples and dropped them on GitHub for you to just grab and go. They make it super-easy to send messages from one ESP32 to the other.

You can find the library here: https://github.com/CrazyRobMiles/SimpleESP32BluetoothBLE

ESP32 Bluetooth BLE to Windows 10 Universal Apps

BLE Windows 10.png

So I’ve got this lovely little M5Stack device with an ESP32 processor on it and it is supposed to support Bluetooth BLE. So I thought I’d see if it did. So fired up the example Bluetooth BLE program in the Arduino SDK and then I fired up the Bluetooth sample from the Windows-Universal-Samples and tried to get them to connect.

And they just did. Astonishing. In no time at all I was sending messages from the PC to the M5Stack, and with a bit of fiddling I managed to get data values going the other way as well. I find this amazing and wonderful. Previous attempts to get Bluetooth working like this have always been fairly horrid and fraught. With this I just hit the pair button inside the app on Windows 10, accept a security prompt and then I’m sending packets of data backwards and forwards. I’m definitely going to build something based on this,

Birthday Bluetooth

It's my birthday today. I had my treat over the weekend and am now saving up for a Segway (just about doable) and a twenty acre estate that I can use it in (pretty much impossible). So I'm here in the office, eating chocolates and writing C#. Which counts as a pretty good situation in my book. 

Anyhoo, I've been playing with a present I bought myself last week. It is a Texas Instruments SensorTag. You can pick these up for a very reasonable sixteen pounds or so and they are enormous fun (if you like connecting devices to sensors). It talks Bluetooth BLE and I've fancied having a go at this for a while.

Turns out to be easy to get it to connect to a Windows 8.1 device. Just remember that for Windows you have to pair the tag over Bluetooth. It just works with iOS and Android - I hope that they remove the need for pairing with Windows at some point. 

If you fancy having a go I've written a very simple universal app and put it on GitHub. You can use this to connect to the accelerometer in a SensorTag and get events fired in your program when a new reading is produced. 

I used a superb post from Dan Ardelean to get started, and just built a little wrapper class around methods that he described.  Great fun.