Importing STL files into FreeCAD

One of the light leaks in my leaky camera was because the lens mount had some mounting holes in it that I’m not using. These made for some thinly printed areas which let light in. I wanted to make a modified version of the part without the holes and with a slightly larger lens opening. The problem was that I only had the file as an STL file, not in something that can be edited using FreeCAD. However, it turned out to be quite easy to import the design and then convert it into a FreeCAD model. The first thing you do is use the import dialog to bring in the STL file, select the loaded mesh and switch to the Part workbench and use the commands Part->Create Shape from mesh and then Part->Covert to solid. After that you can work with the part as you would any other.

Remember to convert at the highest possible resolution

This is powerful magic, as it means you can take any STL mesh and work with it. I’ve put the procedure in the blog so that I know where to look when I need to do it again……